WPS/PQR Qualification Check

Manual check for whether the listed supporting PQRs, together, qualify the entered WPS variables. This version only evaluates the listed process, QW-403, and QW-404 checks.

Loading QW-451.1 rule source...

WPS Details

Supporting PQRs

WPS

Result

Reference

Supporting PQR Nos.

WPS No. Date of WPS

Rev. No. Rev. Date

Welding process

Type of welding process

Automatic Manual Machine Semi-Auto

N/A

ASME Sec IX QG-102

QW-403 Base Metals

Supporting PQRs

WPS

Result

Reference

WPS Base Metal

Side A

Side B

Spec No. Type/Grade P-No. Group No.

No QW/QB-422 row selected.

Spec No. Type/Grade P-No. Group No.

No QW/QB-422 row selected.

Base metal thickness range minimum Base metal thickness range maximum

QW-404 Filler Metals

Supporting PQRs

WPS

Result

Reference

Testing

QW-150 Tensile Test

Supporting PQRs

Result

Reference

ASME Sec IX QW-153

QW-160 Guided-Bend Tests

Supporting PQRs

Result

Reference

QW-163 ACCEPTANCE CRITERIA — BEND TESTS
The weld and heat-affected zone of a transverse weldbend
specimen shall be completely within the bent portion
of the specimen after testing.
The guided-bend specimens shall have no open discontinuity
in the weld or heat-affected zone exceeding 1∕8 in.
(3 mm), measured in any direction on the convex surface
of the specimen after bending. Open discontinuities occurring
on the corners of the specimen during testing shall not
be considered unless there is definite evidence that they
result from lack of fusion, slag inclusions, or other internal
discontinuities. For corrosion-resistant weld overlay cladding,
no open discontinuity exceeding 1∕16 in. (1.5 mm),
measured in any direction, shall be permitted in the cladding,
and no open discontinuity exceeding 1∕8 in. (3 mm)
shall be permitted along the approximate weld interface.

QW-170 Toughness Tests

Not checked in this version.